• SPAR Mixer SP-100

    SPAR Mixer SP-100


    Model SP-100A

    Motor
    1/3 h.p., (250W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph

    Controls
    Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection

    Cord and Plug
    6 ft. flexible three wire cord and ground prong.

    Transmission
    Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.

    Speeds
    (Agitator rpm), (Hub rpm’s)
    1. Low Speed 106, 59
    2. Intermediate Speed 196, 110
    3. High Speed 358, 201

    Bowls and Agitators
    Standard equipment includes a 10Qt. (9.5Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

    Attachments
    Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

    Finish
    Top (transmission cover): metallic bronze epoxy enamel
    Bottom : metallic gray epoxy enamel

    Shipping Information
    N.W. 65kgs
    G.W. 80kgs

    Size:
    Depth x Width x Height 
    46cm x 45cm x 76cm

    Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.

     

  • SPAR Mixer SP-800A

    SPAR Mixer SP-800A

    -Motor

    1/4 h.p. (0.20kw), grease packed ball bearing, air-cooled, 110V/60Hz, 220V/50Hz, Single phase

    -Controls
    Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection

    -Cord and Plug
    Single phase are hard wired

    -Transmission
    Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

    -Speeds:
    1. 1st gear 132 rpm
    2. 2nd gear 234 rpm
    3. 3rd gear 421 rpm

    -Bowls and Agitators
    Standard equipment includes a 8 Qt. (7.6Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

    -Finish
    White epoxy enamel

    -Shipping Information
    N.W. 25 kgs
    G.W. 27 kgs

    -Size: (L x W x H)
    47cm x 28cm x 58cm

    Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.

  • SPAR Mixer SP-200

    SPAR Mixer SP-200

    -Motor
    1/2 h.p., (370W) grease packed ball bearing, air-cooled, 230V/50Hz/1Ph
    -Controls
    Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection
    -Cord and Plug
    6 ft. flexible three wire cord and ground prong.
    -Transmission
    Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.
    -Speeds:
    (Agitator rpm), (Hub rpm’s)
    1. Low Speed 106, 59
    2. Intermediate Speed 196, 110
    3. High Speed 358, 201
    -Bowls and Agitators
    Standard equipment includes a 20Qt. (19Litres) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
    -Attachments
    Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
    -Finish
    Top (transmission cover): metallic bronze epoxy enamel
    Bottom : metallic gray epoxy enamel
    -Shipping Information
    N.W. 80kgs
    G.W. 100kgs
    -Size: 
    Depth x Width x Height 
    53cm x 52cm x 87cm
    Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.shipment to shipment.
  • SPAR Mixer SP200/502

    SPAR Mixer SP200/502

    Model SP-500 / SP-502

    Motor
    750W, grease packed ball bearing, air-cooled, 110V/60Hz, 220V/50Hz, Single phase

    Controls
    Spar Mixer controls are top-mounted to give easy access in cramped kitchen environments.

    Cord and Plug
    Single phase are hard wired

    Transmission
    The unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

    Speeds:
    1. 1st gear 40 rpm
    2. 2nd gear 70 rpm
    3. 3rd gear 90 rpm
    4. 4rd gear 106 rpm
    5. 5rd gear 140 rpm
    6. 6rd gear 170 rpm
    7. 7rd gear 190 rpm
    8. 8rd gear 210 rpm
    9. 9rd gear 230 rpm
    10. 10rd gear 260 rpm

    ● Bowls and Agitators
    Standard equipment includes a 5Litres high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

    ● Finish
    White epoxy enamel

    ● Shipping Information
    N.W. 15 kgs
    G.W. 16 kgs

    Carton Size: (L x W x H)
    38cm x 31cm x 45.5cm

    Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment

     
  • SPAR Mixer SP-80HI

    SPAR Mixer SP-80HI

     Motor

    3 h.p. (1/8HP:automatic:optional), grease packed ball bearing, air-cooled,220/380/415V/60HZ,3PH

    ● Controls
    Spar Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection

    ● Cord and Plug
    6 ft. flexible three wire cord and ground prong.

    ● Transmission
    Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components.

    ● Speeds:
    1. 1st gear 69 rpm
    2. 2nd gear 121 rpm
    3. 3rd gear 204 rpm
    4. 4th gear 356 rpm

    ● Bowls and Agitators
    Standard equipment includes a 80 Qt. (I.D.50 x H46.8 x TH2 cm) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.

    ● Attachments
    Hub, Meat Mincer, Vegetable Slicer
    Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.

    ● Finish
    Top (transmission cover): metallic bronze epoxy enamel
    Bottom : metallic gray epoxy enamel

    ● Shipping Information
    Gross 455 kg
    Net 550 kg

    ● Size:
    Depth x Width x Height 
    108cm x 79cm x 156cm

    Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.shipment to shipment.